Keypad Instructions 1156-10, 1105-2, 1105-3 and 1158-46

Below you will find Engineers Quick Start instructions for 1156/10, 1105/2, 1105/3 and 1158/46 Keypads.

Keypad instructions for 1156/10 and 105/2

1 - Press the button on the rear of the keypad three times within a time period of six seconds.
2 - Enter a password (must be six digits) and press the ‘Key’ button.
3 - Enter the door release time, for example for five seconds press 5 and then press the ‘Key’ button.
4 - Enter the first door open code (between three and eight digits) and press the ‘Key’ button.
5 - Up to eight different door open codes can be entered. After you have finished entering door open codes press and hold the ‘X’ button until a long bleep is heard. This will exit from the programming mode.
 
To change the door open code proceed as follows –
1 - Press the ‘Key’ button followed by the ‘X’ button followed by the ‘Key’ button; now enter the six-digit password.
2 - Press the ‘Key’ button twice. • Press 5 (for 5 seconds door release time) and press the ‘Key’ button.
3 -Enter the new door open code (between three and eight digits) and press the ‘Key’ button.
4 - Up to eight different door open codes and be entered. After you have finished entering door open codes press and hold the ‘X’ button until a long bleep is heard. This will exit from the programming mode

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Keypad instructions for 1105/3 and 1158/46


1 - Press the button on the rear of the keypad three times within a time period of six seconds
2 - Enter a password (between 6 & 8 digits) and press the 'Key' button
3 - Press the 'Key' button followed by the 'X' button followed by the 'Key' button; now enter the password and press the 'Key' button
4 - Enter 311105 and press 'Key'
5 - Up to 22 different door open codes can be entered. Each code can be between 3 and 8 digits long.
6 - Enter 01 ????????, 'Key', 1, 'Key' for the first code. Enter 02 ????????, 'Key', 1, 'Key' for the second code and so on up to code 22.
7 - Where? is the door code
8 – Press and hold the ‘X’ button until a long bleep is heard. This will exit from the programming mode.
 
To change the door open code -
1 - Press the 'Key' button followed by the 'X' followed by the 'Key ' button; now enter the password and press 'Key'
2 - Enter 90 ????????, Where ? is the old door code, press 'Key' button
3 - Enter the new door open code (between three and eight digits) and press the 'Key' button.
4 - Press and hold the 'X' button until a long bleep is heard. This will exit from the programming mode.

 

Quick Start Guide

To get you started you can click here to read our quick start guide...

Quick Start...

Keypad Instructions

1156-10, 1105-2, 1105-3 and 1158-46...

Instructions...

Fault Finding

On this site we have a number of pages that should help you when you are fault finding...

Find Product...

Programming a Product

On this page we have a number of sections that should help you when you are programming a product...

Find Product...

Identify A Product

On this site we have a number of pages that should help you identify a product...

Find Product...

01376 556010
Option 2 for Technical
or email
technical@urmet.co.uk