Proximity Programming

Below you will find Proximity instructions for 1104-X and 1103-X


1104/1/2/3

To add a key fob
  • Use up or down arrows to select a number between 01 and 499 that has no dots next to it.
  • Hold the fob against the controller to the right of the display
  • Verify the central dot on the display lights
  • Press the up arrow several times until 3 dots are shown on the display
  • Press the tick to confirm

To delete a key fob
  • Use up and down arrows to select the number of the fob to be deleted
  • Press and hold the tick button for 1 second
  • The display will flash and the dots will go out. The fob is deleted.



1103/1/2/3

To set a master key
  • Press and release the button on the reverse of the unit
  • Wait until the display shows 000
  • Press and release the button on the reverse of the unit again
  • The display should show - - -
  • Present a fob to the reader, one line will rise
  • Remove and represent the fob to the reader and hold until STO appears
  • Remove key

To add a key
  • Present a master key to the unit until r - 0 is displayed.
  • Remove key
  • Present key to be programmed to the unit
  • The unit will bleep and display the new key number. Remove the key
  • To return to normal briefly present a master key to the unit

To delete a key

Please contact our Technical Support, call 01376 556010.

Quick Start Guide

To get you started you can click here to read our quick start guide...

Quick Start...

Keypad Instructions

1156-10, 1105-2, 1105-3 and 1158-46...

Instructions...

Fault Finding

On this site we have a number of pages that should help you when you are fault finding...

Find Product...

Programming a Product

On this page we have a number of sections that should help you when you are programming a product...

Find Product...

Identify A Product

On this site we have a number of pages that should help you identify a product...

Find Product...

01376 556010
Option 2 for Technical
or email
technical@urmet.co.uk